EDU Articles
Popular articles
What is Adjusted EBITDA?
Basically synonymous with Normalized EBITDA, Adjusted EBITDA is a non-GAAP method of making earnings valuations a little more standardized between companies. Adjusted Earnings is a valuation that has many moving parts in the form of the interest, taxes, depreciation and amortization that might be included there, in addition to the non-GAAP nature of the methods. EBITDA removes all of those moving parts and looks at the Earnings before any of the other arithmetic interferes, hence the name Earnings Before Interest, Taxes, Depreciation, and Amortization. Continue reading...
What is Earnings Before Interest, Taxes ,and Depreciation (EBITD)?
Earnings Before Interest, Taxes, and Depreciation (EBITD) is one method of viewing the earnings of a company with some of the typical expenses added back into it. It is not to be confused with its close cousin EBITDA, which also adds amortization back in. Amortization is essentially the same thing as depreciation, but amortization applies to intangibles such as debt principal amounts and intellectual property. Continue reading...
What is Earnings Before Tax (EBT)?
Earnings before tax (EBT) is used to look at cash flows after expenses but before taxes. In a world without tax, this is what earnings would look like. Taking advantage of an advantageous tax-event, or hiring a better CPA, or merging with a company that can reduce the tax implications of some regular transactions, can bring earnings closer to their before-tax amount. Earnings before tax from an accounting standpoint is net income (which is another word for earnings) with taxes added together with it. Continue reading...
What is EBITDA?
EBITDA stands for Earnings Before Interest, Taxes, Depreciation and Amortization, and is used as a ballpark figure for where the company’s earnings are without these expenses. It gives a picture of the total operating revenue of a company with the expenses that are related to financing decision and the tax environment left out. Accountants can calculate EBITDA by taking net income (earnings, or operational earnings) and adding interest payments, tax obligation, depreciation of hard assets, and amortization of intangibles back into it. Continue reading...
What does Earnings mean?
Earnings is another word for the net income of a company. It is one of the most important numbers in corporate finance. If a company cannot show earnings, and growth in earnings, investors aren’t going to stick around. Earnings are normally computed as revenue minus taxes and expenses. It is synonymous with net income. Earnings is a positive cash outlay for the year, which means the company is not operating at a deficit. Continue reading...
What are Corporate Earnings?
Earnings are the net revenue of a company after expenses and, sometimes, taxes. Also known as profit. Corporate earnings are an important metric for individual companies and the economy as a whole, because it shows how much money has been made. Revenue is the inflow of money to a company, and earnings are the net revenue, or profit, after expenses have been taken out. Of course there is also EBITDA, which is Earnings Before Interest Taxes Depreciation and Amortization, but this is a non-GAAP method. Earnings are usually calculated on a quarterly basis. Continue reading...
What is Intrinsic Value?
Intrinsic Value is the value of a security which is “built into it.” Both options and stocks have it, but it is different for each. Options and stocks have intrinsic value. For options, the intrinsic value is easy to compute, if the option is in-the-money. It is the difference between the strike price of the option and the market price of the underlying security. If an option is out-of-the-money it has no intrinsic value. Continue reading...
What is Cash Flow After Taxes?
Cash flow after taxes (CFAT) is nearly the same thing as EBITDA, but with taxes left in. One way to arrive at Cash Flow After Taxes is to take the net income of the business and add in interest, amortization, depreciation and other non-cash expenses. This is one item away from the formula for EBITDA, which also adds tax back in to arrive at the Earnings Before Interest, Taxes, Depreciation and Amortization. Continue reading...
What is the Equity Multiplier?
The Equity Multiplier is a number used to compare companies, arrived at by dividing total assets by owner’s equity, and it gives an idea of what proportion of the company’s assets have been financed through equity vs debt. In general a low Equity Multiplier is a good sign because it means that a higher proportion of equity has been used to acquire assets, as opposed to funding assets with debt. However, the absence of significant debt could mean that the company lacked the credit rating to issue debt or take out loans. Continue reading...
What is Cash Flow-to-Debt Ratio?
Comparing operating cash flow to the size of a company’s debt obligations can give investors and analysts an idea of how capable a company is of paying of its debts. This ratio compares the size of a company’s cash flow from operations to the size of its debt, in an effort to get an idea of how capable a company is of paying off its debt obligations, and how long it would take if all cash flow were diverted to debt service. Continue reading...
What is Times Interest Earned (TIE)?
Times Interest Earned (TIE) is also known as the interest coverage ratio, is a cash-flow analysis that compares the pre-tax earnings of a company to the total amount of interest payable on their debt obligations. A healthy ratio indicates that a company will probably not default on loan repayments. To compute this ratio, divide a company’s annual income before taxes by their annual interest payments on debt obligations. This ratio is not concerned with the actual principal due on loans since the principal amount is already pegged to some of the assets on the books of the company, and other fundamental equations will already factor that in. Continue reading...
What is Return on Sales?
Also called net operating margin, return on sales can indicate how well a company makes use of its sales revenue. By dividing Operating Profit by Net Sales, we can arrive at the Return on Sales. Essentially what we’ve done is broken down profits on a per sales basis. We can see what percentage of sales ends up as profit, or, on the other side of the coin, how much profit is generated per unit of sales. This can be useful for a comparison of companies of different sizes, because it excludes their assets, capital structures, taxes, and interest. Continue reading...
What is standard deviation?
Standard Deviation is a measurement of how far from the average (mean) the majority of a data set lies. Standard Deviation is a measure of variability, and it is on a different scale for each data set being measured; there is no “standard” standard deviation. It is possible to normalize it for comparison to other data sets using measurements like r-squared and the sharpe ratio. The number arrived at when computing standard deviation is going to reveal the distance, in terms of one of the quantifiable variables being observed, from the average, in either a positive or negative direction, within which 68% of the data set falls. Continue reading...
What is Cash-Flow Financing?
Cash flow financing is an alternative method of securing a loan, in which cash flows are the collateral, not assets. In cash flow financing, also known as cash flow loans, a lending institution will base their decisions regarding the size of the loan and the loan repayment schedule on future expected cash flows of the company. The cash flows serve as collateral instead of assets, as in an asset-backed loan. Continue reading...
What is Total Enterprise Value?
Enterprise value is an amount that would have to be paid for a company to acquire all of its equity and debt. It is notable that cash and cash equivalents are left out of this equation since that amount is netted out of a cash purchase. The basic formula for enterprise value is market capitalization + debt obligations and any minority interests or preferred shares. This regularly appears in the numerator position in the EV/EBITDA ratio. Often investors can just look at the market capitalization of a company to get an estimation of the size of the company. Continue reading...
What is EBITA and Why is it Important for Investors?
Navigate the complex world of financial metrics with a deep dive into EBITA. This guide elucidates the essence of Earnings Before Interest, Taxes, and Amortization, offering insights into its applications and distinctions from EBITDA. By stripping away taxes, interest, and amortization, EBITA provides a clearer view of a company's core profitability. But how does it stand against standardized GAAP earnings? And where does it fit in the broader landscape of financial analysis? Equip yourself with the knowledge of EBITA and its role in the financial world, ensuring a more informed approach to investment decisions. Continue reading...
What Is EBITDA Margin?
In the complex world of finance, metrics like EBITDA Margin provide a straightforward way to assess a company's profitability. EBITDA, which stands for Earnings Before Interest, Taxes, Depreciation, and Amortization, is a powerful tool for understanding how efficiently a company generates profits from its core operations. Let's delve into what EBITDA Margin is, how it's calculated, its advantages, and its drawbacks. EBITDA Margin is a performance metric that focuses on the core financial health of a business by eliminating non-operating expenses. Continue reading...
How Much Does (and Will) Social Security Pay?
Social Security uses a formula that applies a factor to your average monthly income from the 35 years in which you earned the most. The benefit will be calculated for your Normal Retirement Age (67 for most people today), and you should receive statements in the mail keeping you updated on your projected or actual Social Security Retirement Benefits. Every year, you should get a statement from the Social Security Administration that provides you with exact numbers. The amount depends on the age at which you retire, and the contributions you made to Social Security over the years. The formula uses the 35 years in which you earned the most, and divides it by the total number of months in 35 years, which is 420, which leads to your Average Indexed Monthly Earnings (AIME). Continue reading...
Can I Start Collecting My Social Security Benefits If I’m Still Working?
Yes, you can start receiving social security benefits before you actually stop working, and your benefit amount will not be affected if you have attained normal retirement age, or NRA, which is determined based on the year of your birth. NRA is 67 for most people today. If you start to take benefits while working and before the normal retirement age, your benefit will be reduced. But there are a few caveats to consider if you start to receive the benefits before your normal retirement age. Continue reading...
What is GAAP?
Freddie Mac is a government-sponsored company which purchases mortgages from banks and securitizes them for sales to investment banks or individuals. Freddie Mac is not a government organization, but was established by a congressional mandate in the 1970’s. It’s proper name is the Federal Home Loan Mortgage Corporation (FHLMC). The company’s purpose is to make mortgage debts into marketable securities by purchasing the mortgage risk and cash flow from banks and dividing into tranches which are sold to or through investment banking institutions. The securitized mortgages are known as Collateralized Mortgage Obligations, or CMO’s. Continue reading...